Näytä koko versio : Onnistunut Firmware päivitys?
eli Firmware päivityksen jälkeen yksikään backup orkkis XboX peli ei toimi ja sekin ainoa aito peli joka yhteensopivuus listasta löytyy tunnistuu DVD levynä ja pyytää kohteliaasti asettamaan pelin Xboxiin.
Tausta tietoa:
1. asema on BenQ
2. Flashays tehty Iprep 101:llä tehdyllä buuttaavalla usb tikulla seuraten selkeää opasta alusta loppuun ongelmitta.
3. 360 pelejä en omista kun ensin haluan saada homman pelitäämään niillä mitä on.
Ja sinulla on Xbox360 + kiintolevy + emulaattori ladattuna ja asennettuna 360:sen kiintolevylle? Backupit tallennettu millaiselle levylle?
360 löytyy
kiintolevy löytyy
emulaattori ladattu ja asennettu ... löytyy
tarkennetaan vielä että tämä ainokainen orkkis Xbox peli toimi ennen FW päivitystä (tunnistui siis pelinä eikä DVD elokuvana)
Backup pelit tallennettu DVD-R levyille.
Toimiiko Xbox360 pelit miten?
kuten jo sanoin valitettavasti en omista näitä 360 pelejä vielä ... enkä nyt viitsisi tämän takia ostamaan lähteä
ainoa asia mikä itselle tulee mieleen on että DVD key ei ole kopioitunut sittenkään. jos näin on onko homma kirjaimellisesti menetetty? osaako joku sanoa missä kohtaa tuo avain pitäisi löytyä jos se on tullut ulos oikein tuohon Backup bin:iin
ainoa asia mikä itselle tulee mieleen on että DVD key ei ole kopioitunut sittenkään. jos näin on onko homma kirjaimellisesti menetetty? osaako joku sanoa missä kohtaa tuo avain pitäisi löytyä jos se on tullut ulos oikein tuohon Backup bin:iin
Tätä minäkin vähän hain tässä. Jotkin asemat pelaa ilman tuota ID:tä, mutta pelit ei pelaa. Ne tunnistuu vain leffoina ja leffat pelaa.
ID on tallessa, jos alkuperäisestä firmwaresta on kopio.
alkuperäisestä on kopio ... mutta tartteisi saada selville että missä se tuossa tiedostossa on. Ja MIKSI se ei tullut tuohon "hacked" versioon, ja kun mulla tapana aina on pelätä pahinta niin nyt sitten tartteis tietää missä kohtaa se tosiaan on jotta voisin verrata orkkista tuohon asemassa nyt olevaan. Ettei joku corruptio paholainen ole tullut pilaamaan tätä hommaa.
Vastailempa tässä itselleni ja koitan kerätä hiukan paniikin lievitystä.
USB tikulta löytyy Backup kansiosta tiedosto BenQ_OFW.bin
ja netistä löysin sellaisen avain kohdan kuin E030 ja tässä kohtaa on heksa settiä 90 48 ... etc
kun taas EI Backup kansiossa oleva BenQ_CFW.bin jonka oletan olevan tämä Hacked versio puskee E030 kohdalla 77 77 77 77 ... etc
eli nyt vaan seuraavaksi askeleeksi lykätä tuo orkkis takaisin ja yrittämään uudelleen? vai ymmärsinkö nämä O:t ja C:t väärinpäin?`
jolloin Vaimo tulee ja lynkkaa mut.
vai onko edes avain tuossa E030 osoitteessa mitään oikeaa?
ja tietenkin jos mulla nyt on tuo Aito DVD avain vielä tallessa niin mitä tuon avaimen pituus on?
Ehkä selkeintä on tosiaan koettaa palauttaa se alkuperäinen (Backup) sinne asemaan ja kelata asiaa uusiksi.
Yksi vaihtoehto on tietty editotilla kopioida se ID sieltä backupista sinne customiin niiden seiskojen tilalle ja sitten dumbata se customi asemaan.
Näillä mennään mitä on ... toivottavasti toi kohta nyt on oikea ja Backup muuten kunnossa.
Aina kannattaa laittaa orginal takas ja sen jälkeen vasta uudestaan.
Jotkut piirisarjat kenkkuilee benq kanssa oon lukenut noista samoista ongelmista joskus aikaisemmin.
Haiskahtaa omasta mielestä softa vialta.
Seuraavan kerran kun flashsäät ni tarkista se "Hacked.bin" et key on kunnossa toolboxilla.
okei ... päivitystä asiaan.
Orkkis FW asentui moitteetta ... ja homma toimi niinku orkkiksella pitääkin.
iXtreme 1.4.1:n kanssa orkkis pelikään ei toiminut. (tunnistui DVD:nä)
kun taas 1.4:n kanssa toimi...
... mutta yksikään alkuperäisen Xboxin backup ei toimi vieläkään.
Osa antaa virheen not supported ja osa että tapahtui virhe.
X5829.0 B1884.0 (mitä ikinä ovatkaan)
ideoita?
vai onko näiden orkkis pelejen oltava poltettu jollain kikkakuudellatoista jotta toimivat 360:ssä?
En ole ite viel kokeillu xbox pelejä tossa lootassa.
Kokeile polttaa näillä imgburn ohjeilla http://krypt0n.50webs.com/data/mod/Backup.html#stealth.
Tais olla niin että niistä xbox peleistä pitää tehdä Xtreme Xbox 1 varmuuskopio.
Jotain sektori juttuu pitää lisäillä googlella löytyy lisää....
http://forums.xbox-scene.com/index.php?showtopic=588763
Kiitokset kaikille neuvoja antaneille...
Tosiaan ilmeisesti tuo "vika" joka minulla oli. osoittautuikin ominaisuudeksi sillä DVD avain löytyi tästä 1.4.1 version hacked flashistäkin.
Nyt en pysty uutta levyä juuri tekemään noista orkkis Xbox peleistä että pääsisin kokeilemaan miten tuo onnistuu.
Ilmeisesti siis nuo backupit joita alkuperäisellä Xboxilla olen käyttänyt onnistuneesti eivät tosiaan sovellu 360:lle.
Ainoa asia joka enään askarruttaakin on se että tukeeko 360 peleissä lainkaan single layer levyjä.
Kun noista dreamin linkeistäkään ei löytynyt muuta kuin Dual Layer mainintoja. Ilmoittelen jos homma ökköttelee vielä jatkossa.
PS. kiitokset näistä "henkiä" pelastavista foorumeista
Levyinä pitää käyttää DL-levyjä.
kiitos tuosta kommentista =)
pistää hymyilyttämään tämänpäiväiset firmware dumppaukset ja niiden kanssa kiroilut... tuon kun olis osannu ottaa selville niin ei olis tarvinnu turhaan hikoilla.
kumma ettei noinkin yksinkertaista asiaa mitenkään liian selvästi ollut esitetty. kommentteja löytyi kyllä tyylii "alkuperäisen boksin backupit toimii jos ne löytyvät tuettujen listalta" isoilla vois olla perässä JOS ne on poltettu DL levyille käyttäen kymmenen kertaa monimutkaisempaa poltto kaavaa kuin ykkönen peleiltään vaati. Juurikin tämä Stealth homma selvitti asiaa todella paljon.
Joskus tais olla jossain C4EVA firmwarwssa oli dvd5 tuki xbox peleihin.
Tais olla samsung asemaan.
Benq firmispaketin mukna tullut txt.
C4EVA_iXTRM-Benq V1.4
-----------------------------------------------------------------------
Media Stealth, Disc-Jitter,Xbox 360 backup firmware modification!
Features
-----------------
(v1.41) Read Sector fix
(v1.41) 8x firmware dashboard speed fix
(v1.4) Disc jitter fix
(v1.1) Extra compatability for some DVD movies
(v1.0) Defeats all current Xbox Live detection attempts
(v1.0) Boots ONLY Stealth Xtreme Xbox 360 backups
(v1.0) Boots ONLY Stealth Xtreme Xbox 1 backups
(v1.0) Boots all Xbox 360 originals
(v1.0) Boots all compatible Xbox 1 originals on Xbox 360
Use on Xbox Live at own risk
Juu näin oli että vanhemmassa Xtreme firmiksessä on toi DVD5 tuki.
Tämä olis munkin pitäny laittaa kun en ole live miehiä.
Koodista poimittu "(V5.0) Single Layer DVD disc support(+/-R) for both Xbox1 and 360"
"Single layer disks now supported for both Xbox1 and 360. The disks can be in either the same normal raw dump method or in XBOX file ISO format.
This fully works with Xbox 1 using the new Qwix or gdfimage created ISO. The default.xbe must be unmodified and still be signed (If in doubt , copy from original)"
------------------------------------------------------
Xtreme firmware 5.3A,5.3B,5.3C,5.3D for TS-H943 Xbox 360
------------------------------------------------------
Disc-Jitter, Disc-Lockon, Single Layer!, FirmGuard, Multi Speed, Media Stealth, One Firmware, Xbox 360 backup and extraction firmware modification!
Features
-----------------
(v5.3) Disc-Jitter added for Challenge Types 5/7 to avoid possible replay detection.
(v5.3) Support added for DVD drive to Report as Hitachi 79
(v5.2) Disc-LockOn added for chronic open tray consoles.
(v5.2) DVD Video disc problems fixed.
(v5.1) Open Tray errors fixed (PFI and SS read routines updated)
(v5.1) 5.1c (Dual speed, default fast) and 5.1d (Dual speed default quiet\slow) read speed (Originals unaffected). Both toggle with original Xbox1/360 disc
(V5.1) Xbox1 DDE errors caused by firmware, patched
(V5.1) Possible Xbox1/360 DDE errors caused by firmware, patched
(V5.1) Single Layer DVD disc support(+/-RW) for both Xbox1 and 360
(v5.1) New easier batch file "Make Xtreme firmware.cmd" to make all firmwares.
(V5.0) Single Layer DVD disc support(+/-R) for both Xbox1 and 360
(V5.0) Xbox1 file ISO support - burn just game files to disk in ISO format
(V5.0) Xbox1 file ISO capacity increase to utilise full disk space for single layer
(v5.0) 360 file ISO support (Work in progress. New QWIX tool to come)
(V5.0) Supports older style XBox1 disk format (just burn game.iso)
(v5.0) Enable0800 disk now supported on single layer disk
(v4.2) Updated firmware and Make files for Error 66 swapped drives/motherboards from Hitachi XBox 360 and for MS25 consoles manufactured around/after end of May/start of June 2006. There is no change for drives already running Xtreme 4.2x
(v4.2) Security Sector read improved. Should help with Open Tray/Rubberband error.
(v4.1) Improved FirmGuard.
(v4.0) MS28 core firmware. Also better and faster media detection.
(v4.0) FirmGuard added. On by default. Firmware cannot be Read/Written by 360 console. Can ONLY be turned off (Read/Write enabled) via Enable0800 mode.
(v4.0) 4.0A firmware. 4.0A is default Fast Read Speed mode. Quite/Slow Read mode for backups activated via any Xbox 360/Xbox 1 Original game disk.
(v4.0) 4.0B firmware. 4.0B is default Quiet/Slow Read Speed mode. Fast Read mode for backups activated via any Xbox 360/Xbox 1 Original game disk.
(v3.3) Dual Read Speed mode (Quite/Slow Read mode for backups activated via any Xbox 360/Xbox 1 Original game disk.)
(v3.2) Improved Media speed patch, forced full speed on all media types!
(v3.1) Added Booktype overwrite patch (bitsetting to Dvdrom no longer required)
(v3.1) Added Media speed patch (drive treats backup disc speed rating same as original)
(v3.1) Fixed DVD Movie backup/Xbox 1 backup read bug.
(v3.0) Stealth Media implemeted into firmware. Backups now appear exactly as original disk regardless of which disk check command used by Xbox 360
(v3.0) Enable0800 mode supports extraction of raw PFI (Physical Format Information) and raw DMI (Disk Manufacturing Information)
(v3.0) Support for loading of extracted PFI and DMI from disk
(v3.0) Non-Stealth Backups automatically enhanced with embeded PFI for Xbox 360 and Xbox 1
(v3.0) Included new Video.iso for Xbox 360 and Xbox 1 backups, now the same as originals
(v3.0) Security placeholders/bad sectors for 360 backups are outside both valid psn ranges so they cannot be read/checked by 360 host
(v2.0) Extraction part of firmware enabled with Enable0800 DVD. ISO included.
(v2.0) In Enable0800 mode, allows drive to function natively under Windows without any hardware conversion/adaptors
(v1.0) Boots all Xtreme Xbox 360 backups
(v1.0) Boots all Xtreme Xbox 1 backups
(v1.0) Boots all Xbox 360 originals
(v1.0) Boots all Xbox 1 originals on Xbox 360
Use on Xbox Live at own risk
Technical details
------------------------
Disc-Jitter is slight randomization added to the result of Challenge types 5 and 7 so as to emulate a result from an actual physical drive.
This is to avoid any possible replay detection.
Disc-LockOn is additional laser calibration performed when disc inserted returns a cannot identify disc type error. This is for consoles that had very bad open tray issues (Finally got hold of one that had this problem :) )
Open tray errors now fixed for good, but "Open Tray" is still a valid status for disc insertions when the drive cannot reconize the disc.
Dual speed firmwares C (default fast) and D (default quite/slow) return. Both toggle with original Xbox1/360 disc. Originals unaffected.
Added patch to routines that specifically targeted Xbox 1 discs with read errors
Added patch to a routine that may have caused read errors on Xbox1/360 discs.
Added support for -/+RW discs for both Xbox1 and 360 discs.
Added easier batch file to create firmwares "Make Xtreme firmware.cmd". Just follow the prompts.
Single layer disks now supported for both Xbox1 and 360. The disks can be in either the same normal raw dump method or in XBOX file ISO format.
This fully works with Xbox 1 using the new Qwix or gdfimage created ISO. The default.xbe must be unmodified and still be signed (If in doubt , copy from original)
360 file ISO is still in development. The exact strcture for the 360 disc is being developed and a new Qwix will support the creation of these disks.
Xbox1 file ISo now supports full 4.7GB as no need for video partition etc.
For Xtreme 5.3C all backup Read Speed is same as original game disks 12x. Originals unaffected and no speed switch
For Xtreme 5.3D all backup Read Speed is quite/slow. Originals unaffected and no speed switch
Fall update 2006 included DVD Drive version lockdown on consoles manufactured around end of May/start of June 2006. These consoles are now locked to the version of DVD drive that came with the console. If the DVD drive is different than original drive, Error 66 will be displayed. The response of the Atapi Inquiry command is compared to the stored original drive response to achieve this. (Thanx to DeViLs360 for initial find. :) Consoles manufactured before end of May 2006 do not perform this comparison. Only MS25 drives affected by Error 66 with Xtreme 5.0 should use the Make file for MS25.
Changes have also been made to the resulting Hitachi/MS25 reporting firmware to make them more similar to their original firmwares.
To use the updated Make files (only if getting Error 66), just copy your existing Samsung firmware to the extracted directory and rename it to orig.bin. Then run the corresponding Make file for your Original drive. This will create the modified X42a.bin/x42b.bin.
Security sectors are read in this order:
Only if disc is type DVD-Rom read Xbox 360 security sector from PSN FD021E (Layer 1)
Otherwise read Xbox 360 security sector from PSN 04FB1F (Layer 0)
then check for Enable0800 security sector from PSN 04FB1F (Layer 0)
then read Xbox 1 security sector from PSN 605FF (Layer 0)
then read Xbox1 file iso sector from PSN 30020 (Layer 0)
FOr Xtreme 5.3A backup Read Speed is always same as original game disks 12x. Original discs unaffected
FOr Xtreme 5.3B backup Read Speed is always quiet/slow. Original discs unaffected.
FOr Xtreme 5.3C default backup Read Speed is same as original game disks 12x. When Original Game disk is booted, all subsequent backup loading will be at Quiet/Slow Read mode, Original Game disks are unaffected. Turn console off/on to reset back to Default backup read speed (12x). Quiet/Slow Read Speed is for quiet operation and/or cheap DVD+R DL media.
FOr Xtreme 5.3D default backup Read Speed is Quiet/Slow 2-4x. When Original Game disk is booted, all subsequent backup loading will be at Fast Read mode 12x, Original Game disks are unaffected. Turn console off/on to reset back to Default backup read speed for backups (2-4x).
FirmGuard disables reading/writing of drive firmware. This is always on. Can only be turned off via Enable0800 mode. Do not have SATA cable plugged into Xbox 360 console when in Enable0800 mode.
Backups now automatically have pre-locked PSN range same as stated in extracted PFI sector if exists, or embeded PFI, therefore cannot read extracted SS/PFI/DMI sectors from disk. Currently all original 360 games have same PFI sector but maybe not in future, hence new feature of extracting PFI in Enable0800 mode and read from backup at PSN $4fb1d (Xbox 360) and $605fd (Xbox1) or if these sectors are blank embeded PFI will be used
Backups now support loading of DMI sector. This sector is different for every original 360 game but is currently not checked for, but maybe in future hence DMI can now be extracted also in Enable0800 mode and read from backup at PSN $4fb1e (Xbox 360) and $605fe (Xbox1)
Firmware checks for Enable0800 security sector @ PSN 04FB1F and if found, enables 0800 mode of firmware.
ISO image Enable0800.iso is available in Xtreme 4.2 or below. Just burn and insert into drive when you wish to extract security sectors or dump games.
0800 mode of firmware deactivated by inserting game backup (Xbox 360 or Xbox 1) or DVD movie or turning off console.
Reads Xbox 360/Xbox 1 security sector from PSN FD021E (Layer 1)
Reads Xbox 360 security sector from PSN 04FB1F (Layer 0)
Reads Xbox 1 security sector from PSN 605FF (Layer 0)
Reads Xbox 1 file iso sector from PSN 30020 (Layer 0)
Security sector must be extracted using Enable0800 DVD for Xbox360 games and Xbox 1 games
Flashing your drive
---------------------------
For ms28 firmware versions of drive you will need to use the Vcc method or the VIA SATA 10 sec method to read/write flash. Refer to http://forums.xbox-scene.com/index.php?showtopic=535222
Advisable to make a backup of your dvd drive firmware first.("mtkflash r /m orig.bin")
In Windows, copy orig.bin to same directory as this release (same directory as ReadMe.txt and X360SAM.exe)
Double click "Make Xtreme firmware.cmd" and follow the prompts. Thanks to eXOBeX for X360SAM.EXE
Copy x53x.bin to boot disk where x is a,b,c or d.
Power off PC
Plug SATA cable from DVD drive to PC. Power cable drive still connected to Xbox 360
Power on Xbox 360
Power on PC
Boot with standard dos boot disk with included mtkflash utility
Run "mtkflash w /m x53x.bin.bin" where x is a,b,c or d.
Flashing your drive with Xtreme4.x or above firmware installed
----------------------------------------------------------
Plug SATA cable from DVD drive to PC. Power cable drive still connected to Xbox 360
Power on PC
Boot with standard dos boot disk with included mtkflash utility to dos
Power on Xbox 360
Insert Enable0800 disc into drive and wait 10 seconds then eject disc
Run mtkflash as per normal.
Creating a game backup (Recommended way)
------------------------------------------
Use either Schtrom360XtractV3.0 or later
or
Xbox Backup Creator v2.2 or later
************************************************** *********************************
************************************************** *********************************
************************************************** *********************************
************************************************** *********************************
----------------------------------------
Legacy information for creating backups.
----------------------------------------
Extracting Security Sector
---------------------------------------
Ensue SATA cable is plugged from drive to PC.
(This is very important as may be possible in future for console to detect modified firmware due to Inquiry routine enabled for Windows)
Power on Xbox 360.
Insert Enable0800 DVD into drive. Wait 5 or so seconds then remove the Enable0800 DVD. Drive now in 0800 mode.
Turn on PC and wait for Windows to boot
Insert original game disk into drive and wait for windows to detect disk change
Run DVDinfoPro
Enter the following four custom cdb commands:
AD 00 FF 02 FD FF FE 00 08 00 01 C0
AD 00 FF 02 FD FF FE 00 08 00 03 C0
AD 00 FF 02 FD FF FE 00 08 00 05 C0
AD 00 FF 02 FD FF FE 00 08 00 07 C0
Then save hexadecimal display as bin file as SS.bin
Extracting PFI (Physical Format Information) Sector
-------------------------------------------------------------------
Run DVDinfoPro
From Advanced Commands pull down menu choose Send Custom Command
From Preset Commands pull down menu choose "00h Physical Format Information" from under the Read DVD Struct Commands heading
Click Send
Then save hexadecimal display as bin file as PFI.bin
Extracting DMI (Disk Manufacturing Information) Sector
-------------------------------------------------------------------
Run DVDinfoPro
From Advanced Commands pull down menu choose "04h Disc Manufacturing Info"
Click OK on Read DVD Structure Option window
Then save hexadecimal display as bin file as DMI.bin
Creating a game backup
-----------------------------------
Drive is still in 0800 mode.
Extract Isobuilder.rar
Insert original game disk into drive and wait for windows to detect disk change
Run DVDinfoPro
Enter the following custom cdb command to unlock drive: (game data visable)
FF 08 01 01 05 01 03 00 04 07 (new in MS28)
Run Isobuster
Right click on DVD and select Extract From-To
Click Length and enter number of LBAs as follows:
Xbox 1 Original Number of LBA to read 3431264 decimal
or
Xbox 360 Original Number of LBA to read 3567872 decimal
Select User Data (2048 bytes/block)
Click Start Extraction
Enter filename as game.iso and click Save
Upon read error dialogue box choose fill with blank zeros for sector and select use this selection for all errors
Copy game.iso, ss.bin, PFI.bin and DMI.bin to the relevent isobuilder directory (Depending on Xbox 360 or Xbox 1 game)
Run build360.bat (Xbox 360 game) or build.bat (xbox 1 game).
These batch files now expect PFI and DMI bin files
Burn with CloneCd and choose the image.dvd file
Turning off 0800 mode of firmware
------------------------------------------------
Either insert game backup (Xbox 360 or Xbox 1) or DVD movie. This de-activates 0800 part of firmware or turn off console.
Thanks to everyone on #FW, Xboxhacker.net , Xbox-Scene.com, Maxconsole.com and Xbins.Org for their support. Keep up the good work everyone.
Commodore4Eva@gmail.com
Remo jos jaksat niin tee joku yhteenveto kaikesta säädöstä ja laita tähän ketjuun.
Voi olla hyötyä muille Benq miehille.
Siirsin aiheen uudelle aihepiirille "Firmware-keskustelua" ja jätin vuorokauden kestävän uudelleenohjauksen.
Hyötyä tai ei...
Ainakun näitä hommia lähtee ensikertaa tekemään kannattaa tietysti valmistautua mahdollisimman hyvin. Aina ei kuitenkaan selviä ilman ikäviä takaiskuja, kuten omalla kohdallakin kävi. Ongelmia saatta olla esim PC:n yhteensopivuus FW päivitykseen, syynä tähän on pitkälti raidin piirisarja. Itse jouduin lainaamaan kaverin PC:n, jolla homma sujui lähes ongelmitta ... käytössäni oli VIA:n VT8237 piirisarja. Ongelmia syntyikin jälleen USB:ltä buutattaessa pelkkä Boot Sequencen muokkaaminen BIOS:sta ei riittänyt. Tämä nyt poikkeaa hieman aiheesta eli itse Firmwaren vaihdosta, joten takaisin sen pariin.
Nettiä tarpeeksi selaamalla löytyy loistava "for dummies" opas BenQ:ta varten (löytyy myös hitachille ja samsungille). Tällä oppaalla on vaikea oikeastaan tehdä ihmeempiä virheitä jos homma etenee ongelmitta. Opas neuvookin tekemään iPrep 101:lla boot USB:n kädestä pitäen. Tästä sen verran että ohjelma ei ainakaan itselläni toiminut Vistassa ennenkuin sille antoin täydet oikeudet (Suorita järjestelmänvalvojana). Onneksi operoidessani oli käytössä myös Good Old XP.
Kun ohjelmaa ajetaan oppaan mukaan käy se läpi "automaattisen" flash operaation jolloin itselle jää vain paineltavaksi Y (yes). jos kuitenkin tarve tulee ajaa tämä ohjelma läpi manuaalisesti (esim palauttamaan alkuperäisen). Tarvitsee ottaa oikeiden komentojen (joita en ala listata) lisäksi huomioon että sinun tulee tietää "osoite" jossa 360:n DVD asema on kiinni. Tämänkin osoitteen saat selville onneksi helposti iPrep ohjelmalla.
Itse alkuperäinen Firmware tosiaan kannattaa ottaa hyvään talteen. VAIKKA ei koskaan sitä aikoisi enään boxiin palauttaa juurikin tämän maagisen DVD KEY:n takia. Itse Keyn saa selville kun etsii Hex Editorilla alkuperäisestä firmwaresta kohdan C030 - C03F (itse käytin ohjelmana ilmaista XVI32:sta), hacked 1.4 ja 1.4.1 iExtremeen tämä avain tulee kohtaan E030 - E03F, jos siis haluat tarkistaa että avain tosiaan kulkee mukana.
orkkis Xboxin backupeista tosiaan opin sen että, jos aiot niitä tällä masiinalla käyttää ne tulee olla poltettu kuten 360:nkin pelit eli niiden tulle olla "stealth" tästä asiasta Dream antoi loistavan linkin. Ja koska pelin tulee olla iXtreme yhteensopiva sen on oltava 7.05Gt kooltaan eli tarvitset DVD+R DL levyn.
Tästä säädöstä jota tämän boxin kanssa "jouduin" käymään läpi voisi kirjoittaa vaikka romaanin. Ei tietenkään kannata hätääntyä jos itse tähän operaatioon on lähtemässä, ei mikään ylitsepääsemätön homma. Tässä on varmaan paljon asiaa jota suurin osa pitää itsestään selvyytenä, mutta itse en näitä tiennyt joten saattaa jostakin joku kohtalotoverikin löytyä. asiasta saa kysellä lisää jos joku jäi epäselväksi ... pyrin käymään katselemassa tätä topiccia ja muutenkin foorumeita aina silloin tällöin.
Hyvä yhteenveto näin tulisi kaikki ongelma aiheet päättää.
Vaikka asemasta tulisi kivi niin siltikin kannattaa jakaa kokemus muitten kanssa.
Näitä kun tulee tarpeeksi niin ongelmat vähenee huomattavasti.
vBulletin® v3.7.2, Copyright ©2000-2008, Jelsoft Enterprises Ltd.