PDA

Näytä koko versio : ongelmia polttamisen kanssa

sekopää
01.01.2005, 17:43
missä vika en saa poltettu isoja 4.33 gigan kokosia nerossa tulee burnig faild?
olen polttanut ennen yli 4.40 gigasia isoja ilman ongelmia.

kokeilin neroa disjuggeria burnatoncea ja paria muuta kaikissa tulee joku error.

tämä tuli nerossa:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Ohjelmatiedostot\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16.12.2003 20:18:06
Nero version: 6.3.1.12 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A300 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI DVD-ROM GD-2500 >Version: 0101 - HA 0 TA 1 - 6.3.1.12
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HITACHI DVD-ROM GD-2500 atapi Port 0 ID 1 DMA: On
DiskPeripheral : QUANTUM FIREBALL CX6.4A atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 4D060H3 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4160 H: CDRom0
HITACHI DVD-ROM GD-2500 F: CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 383MB (392684kB)
Free physical memory: 109MB (112508kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.1.2005
Burn DVD Image
15:13:27 #1 Text 0 File Reader.cpp, Line 118
Reader running

15:13:27 #2 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4160B running

15:13:28 #3 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using DVD media

15:13:29 #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2275381 (505:38.31, 4444MB)

15:13:29 #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

15:13:29 #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

15:13:29 #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:13:29 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2275382 (2275382) = #2275382/505:38.32
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2275382 blocks [HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------

15:13:29 #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4659982336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2275382 | lead-out | 1 | 0x00 | 0x41

15:13:29 #10 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

15:13:29 #11 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

15:13:29 #12 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

15:13:29 #13 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5*540 KB/s)

15:13:29 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

15:13:29 #15 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

15:13:29 #16 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 14:16,293 (856293ms) -> OK

15:13:29 #17 Text 0 File DVDPlusRW.cpp, Line 606
Start write address at LBA 0
DVD high compatibility mode: Yes

15:17:06 #18 SCSI -400 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05270000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0xA0
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x06 0x5C 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x04 0x00 0x06 0x5A 0x80 0x10
0x09 0x01 0xBB 0x0F 0xA0 0x80

15:17:06 #19 CDR -400 File Writer.cpp, Line 304
Unspecified target error

15:17:06 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

15:17:07 #21 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

15:17:07 #22 SCSI -1039 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x06 0x5A 0x80 0x10
0x35 0x01 0x00 0x0F 0x09 0x01

15:17:07 #23 Text 0 File DVDPlusRW.cpp, Line 759
Media-Format will be stopped after burning

15:17:07 #24 Phase 127 File dlgbrnst.cpp, Line 1836
Generating DVD high compatibility borders

15:17:16 #25 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

15:17:16 #26 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

15:17:16 #27 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 4x (5*540 KB/s)


Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 4, 1, size=89472 bytes, created 6.4.2004 19:39:20 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 4, 1, size=25600 bytes, created 6.4.2004 19:40:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 4, 1, size=5504 bytes, created 6.4.2004 19:43:22 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 9.9.2002 14:24:26 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
sekopää
01.01.2005, 20:00
nyt en saa edes 2 gigan iso.:ja poltettua tavallisen audio cdn saan poltettua

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Ohjelmatiedostot\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 17:35:34
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A300 - HA 0 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI DVD-ROM GD-2500 >Version: 0101 - HA 0 TA 1 - 6.6.0.3
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HITACHI DVD-ROM GD-2500 atapi Port 0 ID 1 DMA: On
DiskPeripheral : QUANTUM FIREBALL CX6.4A atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 4D060H3 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4160 H: CDRom0
HITACHI DVD-ROM GD-2500 F: CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392684kB)
Free physical memory: 28MB (29372kB)
Memory in use : 92 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.1.2005
Burn DVD Image
19:47:54 #1 Text 0 File Reader.cpp, Line 127
Reader running

19:47:54 #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4160B running

19:47:54 #3 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media

19:47:59 #4 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1027711 (228:22.61, 2007MB)

19:47:59 #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

19:47:59 #6 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

19:47:59 #7 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD+R9 Double Layer.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD+R9 Double Layer.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD+R9 Double Layer.)

19:48:00 #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1027862 (1027862) = #1027862/228:24.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1027862 blocks [HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------

19:48:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2105061376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1027862 | lead-out | 1 | 0x41 | 0x00

19:48:03 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

19:48:03 #11 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

19:48:03 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

19:48:04 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3*324 KB/s)

19:48:04 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

19:48:04 #15 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

19:48:04 #16 SCSI -1065 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03538000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0xFA 0x00 0x00 0x0F 0x20 0x00

19:48:04 #17 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes

19:53:58 #18 SCSI -400 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05ED0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0xA0
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x07 0x06 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x04 0x00 0x07 0x05 0x30 0x10
0x09 0x01 0xBB 0x0F 0xA0 0x80

19:53:59 #19 CDR -400 File Writer.cpp, Line 311
Unspecified target error

19:53:59 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19:54:00 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

19:54:01 #22 SCSI -1039 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x07 0x05 0x30 0x10
0x35 0x01 0x00 0x0F 0x09 0x01

19:54:01 #23 Text 0 File DVDPlusRW.cpp, Line 827
Media-Format will be stopped after burning

19:54:01 #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

19:54:17 #25 SCSI -1039 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x07 0x05 0x40 0x10
0x35 0x01 0x00 0x0F 0x09 0x01

19:54:17 #26 SCSI -1039 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03533EA4
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x07 0x05 0x50 0x10
0x35 0x01 0x00 0x0F 0x09 0x01
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x21 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

19:54:17 #27 SCSI -1065 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03536000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0xFA 0x00 0x00 0x0F 0x20 0x00

19:54:17 #28 CDR -1039 File WriterStatus.cpp, Line 167
Focus or tracking error
HL-DT-ST DVDRAM GSA-4160B\H0 T0

19:54:17 #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

19:54:18 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3*324 KB/s)


Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 4, 1, size=89472 bytes, created 6.4.2004 19:39:20 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 4, 1, size=25600 bytes, created 6.4.2004 19:40:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 4, 1, size=5504 bytes, created 6.4.2004 19:43:22 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 9.9.2002 14:24:26 (Adapter driver for rec)
Shadown
02.01.2005, 03:24
Hiukan olisi ehkä kandenut lyhentää noita tekstejä, mutta tuo hiukan kuulostaisi joko ajankohdalta asentaa poltto-ohjelmat tai ehkä koko windows uudestaan.
Itsellä oli kerran ongelmia saada edes tavallinen CD-r poltettua kun menin asentaman uuden emon ja jätin asentamati uudestaan Windowsia.

Tosin yhtähyvin voi polttoasemasi olla vetelemässä viimesiään.
sekopää
02.01.2005, 18:55
asema on ostettu vajaa kuukaus sitte, ja oon polttanu alle 10 levyä..

ja noi ongelmat vaan alkoi yhtäkkiä ilman että olin tehny mitään erikoisempaa..

ja poltto ohjelmat on asennttu uudelleen ja updatettu. eikä auttanu

nyt kun yritin polttaa isoja tulee ohjelma ei vastaa ja puolen tunin päästä tulee burn failed
Shadown
02.01.2005, 19:55
Luulen ongelman olevan laitteistossa.

Eli polttoasemasi on ehkä risa.
Kannattaa jos mahdollista kokeilla muulla asemalla.
Ja jollei ole mahdollista niin mennä yrittään takuu vaihtoa/korjausta.